Refurbished: IBM 6400-050, Line Matrix Printer 500 LPM, 6400-050, 6400-050 IBM
The IBM 6400 Model 050 has a print speed of up to 500/375/200 LPM in Draft, DP (Data Processing), and NLQ (Near Letter Quality) print modes, respectively. This model is a cabinet design.
The IBM 6400 Models 050, P50 are feature-rich impact printers designed to complement the current IBM 6400 line printer offerings. These models:
These models are extremely versatile, cost-effective printers. They offer as standard the IBM Proprinter III XL and Epson FX 1050 graphics emulations, as well as the Printronix P-Series, Printronix P-Series XQ Variant, and Printronix Serial Matrix emulations. These models can also be attached via ASCII, coax, twinax, Token Ring, or Ethernet to such diverse hosts as IBM S/390, AS/400, RS/6000, IBM PC and Netfinity servers, IBM-compatible PCs, non-IBM systems supporting the ASCII serial/parallel interface, and LANs.
Lines Per Maximum Model Minute Print Line Configuration ----- ------------ ---------- ---------------------------- 050 500 13.6 Enclosed cabinet P50 500 13.6 Compact open pedestal design 010 1000 13.6 Enclosed cabinet P10 1000 13.6 Compact open pedestal design 015 1500 13.6 Enclosed cabinet
The IBM 6400-050, P50 Printer is designated a Customer Setup (CSU) machine. The Setup Guide and Configuration Utility diskette contain all of the necessary instructions to enable the customer to set up and configure the printer.
All 6400 050, P50 features ordered at time of base machine order are factory installed prior to shipment, and are covered in the setup and configuration instructions. Features designated as plant order have a field-install equivalent, which must be installed by IBM Service. Performance
IBM 6400 Models 050 and P50
|CPI(1)|Upper Case | Descenders/ | Plot |(Base)| Only | Underlines | Mode -------------------|------|-----------|-------------|------------- | 10 | | | | 12 | | | High Speed | 13.3 | | | (Draft) Mode | 15 | 500 LPM | 428 LPM | 62 IPM (2) | 16.7 | | | | 17.1 | | | | 18 | | | | 20 | | | -------------------|------|-----------|-------------|------------- | 10 | | | | 12 | | | | 13.3 | | | Data Processing | 15 | 375 LPM | 300 LPM | 42 IPM (2) (DP) Mode | 16.7 | | | | 17.1 | | | | 18 | | | | 20 | | | -------------------|------|-----------|-------------|------------- | 10 | | | | 12 | | | | 13.3 | | | Near Letter Quality| 15 | 200 LPM | 155 LPM | 21 IPM (2) (NLQ) Mode | 16.7 | | | | 17.1 | | | | 18 | | | -------------------|------|-----------|-------------|------------- OCR-A / OCR-B (3) | 10 | XXX LPM | --- | --- OCR-B (4) | 10 | XXX LPM | --- | ---
Note: (1) CPI = Characters Per Inch.
Note: (2) IPM = Inches Per Minute.
Note: (3) 120H x 144V DPI (Dots Per Inch).
Note: (4) 180H x 144V DPI (Dots Per Inch).
Note: Print speeds may vary under certain conditions. For more information, refer to the ASCII Programmer's Reference (S544-5635).
Print Options
Vertical spacing-3, 4, 6 or 8 lines per inch, or as selected by host
Horizontal spacing-10, 12, 13.3, 15, 16.7, 18 or 20 characters per inch
Paper Specifications
Continuous form width: 3" to 17" (with tear strips) (7.6 cm to 43.2 cm); when using rear exit, the maximum is 16 inches
Continuous form length: 3" to 24" (7.6 cm to 61 cm)
One to six-part forms
Horizontal and vertical fine-scale forms adjustments
Dual-position lid to allow quick access to forms or stacking of forms
View function for print verification
Optional Graphics Features
Code V and IGP Printronix Emulation
IBM IPDS
Printer Emulations
Standard
Epson FX 1050
IBM Proprinter® III XL
Printronix P-Series and P-Series XQ Variant
Printronix Serial Matrix
Optional
Twinaxial IPDS: IBM 4234-008, 4234-012
Twinaxial non-IPDS: IBM 4234-002, 5225-001, or 5225-004
Coaxial IPDS: IBM 4234-007, 4234-011
Coaxial non-IPDS: IBM 4234-001 or 3287-001
System AttachmentsStandard (ASCII)
AS/400® using the ASCII Workstation Controller port on 9402(except Model Y10), 9404 and 9406
3197, 3477, 3486/87/88 Terminals (parallel port only)
3174 Controller (Asynchronous Emulation Adapter)
ES/9370TM using the ASCII Subsystem
Micro Channel® 370 using ASCII serial or parallel port
RISC System/6000® using ASCII serial or parallel port
LAN Connections to Token-Ring and Ethernet via the Network Print Server feature
IBM PCs or PS/2®s using the ASCII serial or parallel port
IBM-compatible PCs using the ASCII serial or parallel port
Non-IBM Systems using the ASCII serial or parallel port
Optional (Twinaxial, Coaxial)
AS/400 using the Twinaxial Workstation port on models 9402, 9404 and 9406Advanced 36® using Twinaxial Workstation Controller
Advanced 36® using Twinaxial Workstation Controller
System/36TM using Workstation Controller port on models 5360, 5362, 5363 and 5364
5394 and 5494 control unit using Workstation port
3174 Controllers (Release 3.0 or higher)
ES/9370, ES/9000® Processors using the Workstation Subsystem Controller port (FC 6020 or 6120)
S/390® Parallel Transaction Servers via 3174 Controller
Optional (LAN)
Ethernet LAN using the internal Ethernet NIC feature
Physical Characteristics
Models P50
Models 050
Width:
24.6" (62.5 cm)
27" (68.6 cm)
Depth:
20.7" (52.6 cm)
29" (73.7 cm)
Height:
35" (88.9 cm)
42.5" (108 cm)
Weight:
120 lbs. (54.4 kg)
225 lbs. (102 kg)
Power Requirements
100/120/220/240 AC nominal, 50/60 Hz
240 watts typical maximum
ENERGY STAR® compliant
Environmental Conditions
Operational limits:
Relative humidity: 10% to 90% RH
Temperature: 50 degrees to 104 degrees F (10 degrees to 40 degrees C)
Supplies
General Purpose Ribbon-average life: 20M or 30M DP characters
High Contrast Ribbon-average life: 20M or 30M DP characters: With visible light: 2500 or 3600 AIAG-B3 labels With infrared light: 1300 or 1800 AIAG-B3 labels
Call 800.811.8193
