Need Assistance?800-811-8193
Shopping Cart 0 ITEMS IN YOUR CART

Printek FormsPro 4603 Dot Matrix Printer

Manufacturer: Printek

Part # 92379


Availability: IN STOCK

BRAND NEW 90 days Warranty

REFURBISHED 90 days Warranty

The Printek FormsPro 4603 Dot Matrix Printer with Standard Serial/Parallel Interfaces and combined Wireless Ethernet/ImagerPlus Graphics Interfaces can solve your toughest printing problems and automate most paper-handling functions. This printer allows three different set of tractors to be loaded at one time, each capable of a different form. With the FormsPro 4603 printer, you will print with greater legibility and unsurpassed reliability.

The FormsPro 4603 features:

  • A draft speed up to 530 cps, which prints a typical  1,000-character document in less than five seconds.  That's over 700  documents per hour.
  • Auto-switching power supply-can work domestically and internationally, and it weighs less.
  • FormsPro 4603 has the patented Tri-Trak system that allows for three different set of tractors  to be loaded.
  • Superior legibility-even on 9-part forms. Auto-Gap feature adjusts the printhead according to form thickness.
  • Easy-load, tilt-up top to simplify loading, and straight-up paper path eliminates the problem of forms buckling and jamming.
  • A paper jam sensor to permit reliable, unattended operation.
  • Optical sensor prevents printhead from printing beyond the edges of the loaded form.

Ability to print 9-part forms. FormsPro printers have 30% higher  impact force than other brands, making them the preferred choice for  situations where thick forms and multi-part legibility are an issue. 

Tri-Trak System

The Printek model FormsPro 4603 has the patented Tri-Trak  system. This is the only paper-feeding system on the market that allows  three different continuous forms to be loaded into one printer. This  feature saves a great deal of unproductive time spent loading and  unloading forms and also saves space and computer ports.

Print Modes

  • Fast Draft: 530 cps
  • Draft: 400 cps
  • Fast Draft/High Impact: 250 cps
  • High Impact: 200 cps
  • Letter Quality: 100 cps
  • Optical Quality: 65 cps
  • Graphics: 15,360 dps*

Character Matrix

  • Fast Draft: 9 x 9 cell
  • Draft: 12 x 9 cell
  • Letter Quality: 24 x 18 cell
  • Optical Quality: 36 x 18 cell

Printhead

  • 18-wire parallel array

Character Sets

  • Fast Draft, Draft, and Letter Quality for EpsonTM and IBM® Proprinter
  • Optical Quality for OCR-A and OCR-B

Character Spacing

  • 5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1, and 20 cpi

Line Length

  • 13.6 inches (34.5 cm)
  • Software-programmable

Line Spacing

  • 6 and 8 lpi
  • Software-programmable

Paper Handling

  • Tear Bar: Auto-Scroll allows zero tear-off distance
  • Auto-Gap: Adjusts printhead to form thickness
  • Paper Type: Fanfold, continuous forms, edge-punched, 15-lb. minimum weight for single-part paper
  • Sensing: Paper motion and paper out

Operator Controls

  • Normal Operating Mode: Online, Form Feed/Load, Form Select/Unload, and Vertical Print Adjustment

Form Parameters

  • Nonvolatile  memory for ten forms, each supporting settings for  tractor path, cpi,  lpi, form length, left and right margins, top and  bottom margins,  unidirectional printing, slashed or non-slashed zero,  language, font,  high-impact on/off

Operator Indicators

  • LEDs for Power, Online, and Fault
  • 2 x 16 LCD for form selection, on/off line status, and error descriptions

Ribbon

  • Cartridge: Nylon fabric, Möbius loop, 23 million characters

Power Requirements

  • Voltage: 100 to 250 VAC ±10%
  • Frequency: 50 to 60 Hz
  • Power Consumption: 60W nonprinting, 225W printing

Paper Slew Rate

  • 12 ips, with slower rates user-selectable for difficult forms

Paper Width

  • 2.5" to 15" (6.4 cm to 38.1 cm)

Paper Loading

  • Straight path, bottom-loading

Multi-Part Forms

  • 1 to 9 parts
  • 0.025" max. thickness

Graphics Density

  • 60 to 240 dpi horizontally x 72 dpi vertically*

Audible Noise (Draft Mode)

  • 62 dBA

Setup (Automatic Methods)

  • Control panel, pluggable cloning module, or remote via Windows program

I/O Buffer

  • 128k

Standard Interfaces

  • Parallel: Centronics-compatible
  • Serial: RS232, 300 to 19,200 baud

Optional Interfaces

  • Coax/Twinax
  • IPDS/Ethernet
  • TN5250
  • Ethernet

Software Controls

  • Emulation  choice of Printek, Epson FX, IBM Proprinter, DEC  LA120/LA210, Genicom  ANSI, or Basic Bar Codes (Includes Code 39, 2 of 5,  Interleaved 2 of 5.  More available through Genicom emulation)

Physical Specifications

  • H x W x D: 9.5" x 25" x 20.3" (24 cm x 63.5 cm x 51.5 cm)
  • Weight: 43 lbs. (19.5 kg)

Reliability

  • 10,000 hours on electronics, with 100% duty cycle
  • Printhead Life: 500 million characters
  • Warranty:  Dependant on machine purchase, new or refurbished.
There are currently no product reviews
Write a review on this product!

Live Skype

sales@sinca.biz

800.811.8193

Why Shop at Sinca?

RELATED PRODUCTS