Printronix Hardware Kit, Thermal

The Printronix Hardware Kit contains an assortment of fasteners used in the printers.

The Kit Contents Include:

• 4 inch Tie Wraps (4)
• Screw with lock washer 4-40x.31 (2)
• Oval Set screw (2)    Use on aluminum  pulley.
• Retaining Ring .3125 inch (1)
• Zinc Plated Steel Hex Nut M4 (2)
• Screw M4x30mm (2)
• Intermediate Rewinder Clutch (3)
• Wire Saddle Blind Hole (2)
• Screw, M/F, 4-40 (1)
• Plastic Bearing Clip  (2)
• Nylon Washer .25 (1)   For inboard front door hinge to take up excess clearance.
• Hex Socket Button Head ZI Screw (5)
• Hex Socket Head Set Screw M4x8mm (1)  Use on plastic pulley.
• Retaining Ring .875 (1)
• Retaining E Ring .375 (2)
• Button Head Socket Cap Screw M3x6mm (2)
• Retaining E Ring .156 (2)
• Wavy Washer (1) For outboard front door hinge to take up excess clearance.
• Wave Washer .870 OD (1)
• Retaining E Ring .188 (2)
• Curved Washer .194 ID (1)
• Nylon Washer .750x.443x.032 (2)
• Button Head Socket Cap Screw M3x4mm (5)
• Nylon Washer .380x.683x.031 (2)
• Washer .390x.656x.020 (2)
• EMI Clip (3)
• Hole Grommet (4)   For DC and Stepper Motors.
• Frame Plugs .5 inch (2)
• Locking Nut M10 (1)
• Frame Plug .4375 inch (2)  For 4 inch rewinder hole. 
• Button Head Captive Screw M4x10mm (2)
• Socket Head Flanged Screw M4x10mm (10)
• Socket Head Flanged Screw M4x12mm (2)
• Button Socket Head, SS, Screw M5x10mm (2)
• Nylon Washer 1.125x.50x.080 inch (1)
• Damping Button (3)

×

×

×

×

×

×