Physical Features

•  Full-function front panel and large multilingual back-lit LCD display -  with user-programmable password protection

•  Thin film printhead -  with E³ Element Energy Control

•   8 MB Flash memory - including 2.0 MB user-available non-volatile memory storage for downloadable objects

•   Serial RS-232 and bi-directional parallel ports -  with auto detect   USB 2.0 port

•  Dual media sensors - transmissive and reflective, selectable through software or front panel

•  Internal ZebraNet 10/100 Print Server - supports 10Base-T, 100Base-TX, and fast Ethernet 10/100 auto-switching networks.

Printer Operation

• 32 bit 133 MHz RISC processor

• 16 MB SDRAM memory (12 MB user-available )

•  Internal real-time clock

• Advanced label/media counters

• Thermal transfer and Direct thermal printing of bar codes, text, and graphics

•  Auto calibration - printer calibrates when printer is turned on or when printhead is closed using approximately two labels

• Zebra Universal Printer Driver - for Microsoft Windows 2000/XP/Vista operating systems

Media Specifications

• Media type: continuous, die-cut, or black mark, notch.

•  Minimum label length: *

•  Rewind mode: 0.25 in. (6 mm)

•  Peel mode: 0.5 in. (13 mm)

•  Tear-off mode: 0.7 in. (18 mm)

•  Cutter mode: 1.5 in. (38 mm)

• Maximum media roll size:
  8.0 in. (203 mm) outside diameter
  on a 3 in. (76 mm) inside diameter core

• Transmissive (gap) sensing standards:

•  Interlabel gap: 2 - 4 mm, preferably 3 mm

•  Sensing notch: 0.25 in. W (6 mm) x 0.12 in. L (3 mm)

•  Sensing hole: 0.125 in. (3 mm) diameter

• Reflective (black mark) sensing standards:

•  Black mark length (parallel to inside media edge):
  0.12 in. - 0.43 in. (3 - 11 mm)

• Black mark width (perpendicular to inside media edge):
  0.43 in. (> 11 mm)

• Black mark location:
  within 0.040 in. (1 mm) of inside media edge:

• Black mark density: >1.0 Optical Density Units (ODU)

•  Maximum media density: 0.5 ODU

• Media width (label and liner):
  0.79 in. (20 mm) to 4.5 in. (114 mm)

• Minimum label length: See media specifications on page 2

• Maximum full-width media thickness for cutter:
  0.23 mm (0.009 in.)

×

×

×

×

×

×