Need Assistance?800-811-8193
Shopping Cart 0 ITEMS IN YOUR CART

Printek FormsMaster 8000se Dot Matrix Printer

Manufacturer: Printek

Part # 91202

Availability: IN STOCK

BRAND NEW 90 days Warranty

REFURBISHED 90 days Warranty

The Printek FormsMaster 8000se printer, model 91202 with standard Serial/Parallel interfaces and Ethernet interfaces, utilizes the latest technology from Printek, offering the ultimate in reliability and control over your critical printing applications at print speeds up to 800 cps. Operation is office quiet. All configuration parameters may be accessed remotely, putting you in total control of the printer.

Print Speed

The FormsMaster 8000se prints 800 cps in Fast Draft mode, 600 cps in Draft mode. The printer has throughput of 400 lines per minute printing at 80 characters per line.

Tractor System

FormsMaster 8000se has a single set of straight-up tractors. The straight-up paper path eliminates forms buckling and jamming.

Quiet Operation

The noise level is only 55 dBA when used with FormsMaster printstand. Perfect for office use.  

Waste-Free Forms Tear-Off

The FormsMaster 8000se has automatic positioning of forms for tear-off. This saves time, money and material. 

Automatic Printhead Adjustment

FormsMaster printers automatically adjust for any form thickness, up to six parts.  

Easy Setup

FormsMaster printers can be configured through the front panel, downloading or optional plug-in modules. The printers front panel has a 2 x 16 LCD display. Unique parameters for up to 10 different forms can be stored and recalled at any time. User-friendly form names may be displayed on the front panel (i.e.,  "Invoice," "Packing List," etc.).

Fault Recovery

Print jobs can be recovered in the event of a fault condition with the page reprint feature.

Flexible Connectivity

The FormsMaster printers have standard Parallel and serial interfaces. Other optional interfaces include Coax, Twinax, Ethernet and wireless 802.11b interfaces.

The  popular printer emulations are standard with the FormsMaster 8000se.

Print Modes 8000se

  • Fast Draft: 800 cps
  • Draft: 600 cps
  • Fast Draft/High Impact: 400 cps
  • High Impact: 300 cps
  • Letter Quality: 150 cps
  • Optical Quality: 100 cps
  • Graphics (can be emulation dependant): 28,800 dps

Character Matrix

  • Fast Draft: 9 x 9 cell
  • Draft: 12 x 9 cell
  • Letter Quality: 24 x 18 cell
  • Optical Quality: 36 x 18 cell


  • 18 wire parallel array

Character Sets

  • Fast Draft, Draft and Letter Quality for Epson and IBM Proprinter
  • Optical Quality for OCR-A and OCR-B

Character Spacing

  • 5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1 and 20 cpi

Line Length

  • 13.6 inches (34.5 cm)

Line Spacing

  • 6 and 8 lpi. Also software programmable

Paper Handling

  • Tear Bar: Auto-Scroll allows zero tear-off distance
  • Auto-Gap: Adjusts printhead to form thickness
  • Paper Type: Fanfold, continuous forms, edge punched, 15 lb. minimum weight for single-part paper
  • Sensing: Paper motion, paper edge and paper out 

Special Features

  • Horizontal print fine adjustment.
  • Ability to name forms (i.e. "Invoice") for operator display.

Operator Controls - Normal Operating Mode:

  • Online
  • Form Feed/Load
  • Form Select/Unload
  • Vertical Print Adjustment

Form Parameters

  • Non-volatile memory for ten forms, each supporting settings for: tractor path, cpi, lpi, form length, left and right margins, top and bottom margins, unidirectional printing, slashed or non-slashed zero, language, font, high-impact on/off, form name.

Operator Indicators

  • LEDs for Online and Setup
  • 2 x 16 LCD for form selection
  • on/off line status
  • error descriptions


  • Cartridge: nylon fabric, mobius loop, 23 million characters

Power Requirements

  • Voltage: 110 - 230 VAC ±10%
  • Frequency: 50 - 60 Hz

Power Consumption: 60W non-printing,

  • 225W printing

Paper Slew Rate

  • 16 ips, with slower rates user-selectable for difficult forms

Paper Width

  • 2.5″ to 15″ (6.4 cm to 38.1 cm)

Paper Loading

  • Straight path, bottom loading

Multi-part Forms

  • 1 to 6 parts; 0.025″ max. thickness

Graphics Density (May be Emulation Dependant)

  • 60 to 240 dpi horizontally x 72 dpi vertically

Audible Noise (Draft Mode)

  • 55 dBA

Setup (Automatic Methods)

  • Control panel, pluggable cloning module or remote download via Windows program

I/O Buffer

  • 32k

Standard Interfaces

  • Parallel: Centronics compatible
  • Serial: RS232, 100 to 19,200 baud

Optional Interfaces

  • Twinax,Coax
  • Ethernet
  • Wireless 802.11b

Software Controls

  • Emulation choice of Printek, Epson FX, IBM Proprinter, DEC LA120/210, Genicom ANSI or Basic Bar Codes (Includes Code 39, 2 of 5, Interleaved 2 of 5. More available through Gemicom emulation).

Physical Specifications

  • H x W x D: 11.8″ x 26.25″ x 20.5″ (30 cm x 66 cm x 52 cm)
  • Weight: 53 lbs. (24 kg)


  • MTBF: 10,000 hours on electronics with no duty cycle limitations.
  • Printhead Life: 500 million draft equivalent characters.
There are currently no product reviews
Write a review on this product!

Live Skype


Why Shop at Sinca?