Need Assistance?800-811-8193
Shopping Cart 0 ITEMS IN YOUR CART

Printek FormsPro 4600 Dot Matrix Printer

Manufacturer: Printek

Part # 92364


Availability: IN STOCK

BRAND NEW 90 days Warranty

REFURBISHED 90 days Warranty

The FormsPro 4600 Dot Matrix Printer, with Standard Serial/Parallel Interfaces and Coax/Twinax Interface, can solve your toughest printing problems and automate most paper-handling functions. With the 4600 you will print with greater legibility and unsurpassed reliability.    

The FormsPro 4600 printer features:

  • A draft speed up to 530 cps, which prints a typical 1,000-character document  in less than five seconds. 
  • Auto-switching power supply-which can work domestically and internationally.
  • FormsPro 4600 has single set of tractors
  • Superior legibility-even on 9-part forms. Auto-Gap feature adjusts the  printhead according to form thickness.
  • Easy-load, tilt-up top to simplify loading, and straight-up paper path  eliminates the problem of forms buckling and jamming.
  • A paper jam sensor to permit reliable, unattended operation.
  • Optical sensor prevents printhead from printing beyond the edges of the  loaded form.

FormsPro 4600 printers have 30% higher impact force  than other brands, making them the preferred choice for situations where thick  forms (up to 9 part) and multi-part legibility are an issue. The increased readability helps to  increase the accuracy and efficiency of your staff in accounting and  operations.

Print Modes

  • Fast Draft: 530 cps
  • Draft: 400 cps
  • Fast Draft/High Impact: 250 cps
  • High Impact: 200 cps
  • Letter Quality: 100 cps
  • Optical Quality: 65 cps
  • Graphics: 15,360 dps (emulation dependent)

Character Matrix

  • Fast Draft: 9 x 9 cell
  • Draft: 12 x 9 cell
  • Letter Quality: 24 x 18 cell
  • Optical Quality: 36 x 18 cell

Printhead

  • 18-wire parallel array

Character Sets

  • Fast Draft, Draft, and Letter Quality for EpsonTM and IBM® Proprinter
  • Optical Quality for OCR-A and OCR-B

Character Spacing

  • 5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1, and 20 cpi

Line Length

  • 13.6 inches (34.5 cm)
  • Software-programmable

Line Spacing

  • 6 and 8 lpi
  • Software-programmable

Paper Handling

  • Tear Bar: Auto-Scroll allows zero tear-off distance
  • Auto-Gap: Adjusts printhead to form thickness
  • Paper Type: Fanfold, continuous forms, edge-punched, 15-lb. minimum weight for single-part paper
  • Sensing: Paper motion and paper out

Operator Controls

  • Normal Operating Mode: Online, Form Feed/Load, Form Select/Unload, and Vertical Print Adjustment

Form Parameters

  • Nonvolatile memory for ten forms, each supporting settings for  tractor path, cpi, lpi, form length, left and right margins, top and  bottom margins, unidirectional printing, slashed or non-slashed zero,  language, font, high-impact on/off

Operator Indicators

  • LEDs for Power, Online, and Fault
  • 2 x 16 LCD for form selection, on/off line status, and error descriptions

Ribbon

  • Cartridge: Nylon fabric, Möbius loop, 23 million characters

Power Requirements

  • Voltage: 100 to 250 VAC ±10%
  • Frequency: 50 to 60 Hz
  • Power Consumption: 60W nonprinting, 225W printing

Paper Slew Rate

  • 12 ips, with slower rates user-selectable for difficult forms

Paper Width

  • 2.5" to 15" (6.4 cm to 38.1 cm)

Paper Loading

  • Straight path, bottom-loading

Multi-Part Forms

  • 1 to 9 parts
  • 0.025" max. thickness

Graphics Density

  • 60 to 240 dpi horizontally x 72 dpi vertically (emulation dependent)

Audible Noise (Draft Mode)

  • 62 dBA

Setup (Automatic Methods)

  • Control panel, pluggable cloning module, or remote via Windows program

I/O Buffer

  • 128k

Standard Interfaces

  • Parallel: Centronics-compatible
  • Serial: RS232, 300 to 19,200 baud

Optional Interfaces

  • IPDS/Ethernet (Factory Installed Only - allow 4-6 weeks)
  • TN5250
  • Ethernet
  • Wireless 802.11b/g
  • ImagerPlus Graphics

Software Controls

  • Emulation choice of Printek, Epson FX, IBM Proprinter, DEC  LA120/LA210, Genicom ANSI, or Basic Bar Codes (Includes Code 39, 2 of 5,  Interleaved 2 of 5. More available through Genicom emulation)

Physical Specifications

  • H x W x D: 9.5" x 25" x 20.3" (24 cm x 63.5 cm x 51.5 cm)
  • Weight: 43 lbs. (19.5 kg)

Reliability

  • 10,000 hours on electronics, with 100% duty cycle
  • Printhead Life: 500 million characters
  • Warranty: Dependent on purchase condition, New or Refurbished
There are currently no product reviews
Write a review on this product!

Live Skype

sales@sinca.biz

800.811.8193

Why Shop at Sinca?

RELATED PRODUCTS